Skip to main content

This page lists the Proceedings (full papers and abstracts) of the second European Blower Door Symposium, 16-17 March 2007 in Kassel, Germany. 

Contains 36 papers.

Volume content
About the ventilation of dwellings in very low-energy houses in the Czech Republic

Low-energy buildings up to the passive house level slowly become generally accepted also in Tschechien, which is naturally connected with suitable…

J. Tywoniak, P. Kopecký
Zur Wohnungslüftung in Niedrigstenergiehäusern in Tschechien

Niedrigenergiehäuser bis zum Passivhaus-Niveau setzen sich langsam auch in Tschechien durch, was natürlich mit passenden Lüftungsstrategien verbunden ist.…

J. Tywoniak, P. Kopecký
Limits of recognizability of leakages by means of thermography!

Thermography is a helpful means at the visualisation of leakages on the wind and airtightness level. However on the one hand not always the theoretically…

E. Panic
Die Luftdichtheit von Reinräumen – Planung und Messung imklinischen Bereich.

Bei der Herstellung kleinster Strukturen, z.B. in der Produktion von Mikroprozessoren, oder im klinischen Bereich, z.B. in Operationssälen, können sich…

D. Jung
Messstrategien für die Luftdichtheitsmessung von Mehrfamilienhäusern

Die Nachfrage nach Luftdichtheitsmessungen in Wohngebäuden steigt. Somit wächst auch das Interesse an Luftdichtheitsmessungen in Mehrfamilienhäusern. Die…

P. Simons, S. Rolfsmeier
Airtight building envelope and dwelling ventilation in interrelation -retrospection and forecast for Switzerland

All times the building cover was made as airtight as possible. With massive constructions it was all above the plasterwork, which took over the sealing…

H. Preisig
Wie viele Normen verträgt ein Haus ?

If you are asked now about us fully enumerate those standards that we would have to consider if we wanted to start building a house tomorrow, no one would…

R. A. U. Köpcke
Schornsteinhinterlüftung und Rauchabzugsöffnung von Aufzugsschächten -lassen sich solche technisch motivierten Lecks vermeiden?

Das Wissen, wie Bauteilanschlüsse luftdicht hergestellt werden, ist inzwischen relativ verbreitet – zumindest unter den interessierten Bauschaffenden. Bei…

J. Zeller
DIN 1946 – 6Developement of a ventilation concept, instructions and calculationmethodology for architects and planners with consideration of thebuilding airtightness

The interrelation between requirement and implementation and/or realization of the ventilation technique is represented in fig. 9 exemplarily for a building…

W. Reiners
Use of mechanical ventilation in Finnish houses

This study reports ventilation measurement and occupant questionnaire results from newly built 102 Finnish detached houses. The results show that…

J. Kurnitski, L. Eskola, J. Palonen, O. Seppänen
Implementation by the EU Member States of the EPBD : opportunities and challenges in relation to building airtightness

Building airtightness is not a new topic of interest. Already in the seventies of the last century, intense work was done regarding building airtightness in…

P. Wouters, C. Delmotte, N. Heijmans, P. Van den Bossche, F. Dobbels, F.
Luftdichtheits-Messungen in der Tschechischen Republik - Resultate und ihre praktische Anwendung

Sich ändernde Bedingungen der allgemeinen tschechischen Baupraxis führen zu einer ernsthafteren Berücksichtigung der auf die Luftdichtheit bezogenen…

J. Novak
Luftdichtheit im Stahlleichtbau – Gebäudehüllen in Sandwichbauweise

In zunehmendem Maße werden in Europa Dach- und Außenwandkonstruktionen aus Sandwichelementen mit metallischen Deckschichten und Dämmstoffkernen aus…

M. Kuhnhenne, M. Feldmann, B. Döring, S. Spranger, S.
Do the generally recognized rules of the technology require a controlled ventilation in dwellings?

Due to practiced building practice in the past decades the preservation of a sufficient room air quality usually proved as unproblematic. The necessary air-…

D. Lampe
Haustechniksysteme mit Wohnungslüftung

Die Untersuchung der QHA (Qualitätsgemeinschaft Holzbau und Ausbau e.V.) vergleicht und bewertet am Beispiel an einem gebauten Referenzhaus die energetische…

R. Schmidt, R. Käser
Operation of fire place, exhaust hood and dwelling ventilation system

The fundamental requirements, already presented at the 1st European BlowerDoorSymposium, did not change, respectively practice has brought up some points.…

H. Berhorst
Airtightness measurements in laboratory areas to the securing of small loads of particulate matter

Manufacturing and development processes in the electrical industry (microchips), the technology for smallest elements with high precision, the medical…

S. Rolfsmeier
Measuring strategies for the airtightness measurement of multifamily residences

The demand for airtightness measurements in residential buildings rises. Thus also the interest in airtightness measurements in multi-family residences…

P. Simons, S. Rolfsmeier
Airtightness of pure areas – planing and measuring in clinical areas

What is a pure area? In the case of the production of smallest structures, e.g. in production of microprocessors, or in the clinical range, e.g. in…

D. Jung
Building services systems with dwelling ventilation

The investigation of the QHA (quality community timber construction and development, registered association) compare and evaluate by the example of a built…

R. Schmidt, R. Käser
Showing 1 to 20 of 36. Page 1 of 2