In 2008, our trade association, “klimaskaerm” (comparable with FLIB e.V.), started a voluntary certification system in collaboration with Danish Standard. The system costs about 4500 euros per year, and was never very successful; only 3 companies were certified from the start. In 2013, we changed the agency to BK, which could provide...

Several rehabilitation projects of apartment buildings all used passive house components, but implemented different airtightness designs. Two projects (24 and 52 apartments in Ludwigshafen and Frankfurt am Main, respectively) were carried out in the traditional way, using the interior plaster in the area of the external walls...

In order to achieve the most accurate and repeatable – and therefore comparable – measuring results possible when testing the airtightness of buildings, you need testing devices that are able to measure with a level of accuracy adjusted to the intended purpose. If the users want to guarantee the accuracy of the measuring devices, they can...

The book of proceedings of the 9th International BUILDAIR Symposium "Airtight Buildings, Thermography and Ventilations Systems in Practice", held on 8-9 May 2015 in Kassel, Germany. Conta

Condensation risks in wooden building components are mainly caused by water vapor penetrating the cross section of the component through airflow. Even small pressure differentials result in a lot more vapor flowing through a joint of only a few millimeters than that which would migrate by diffusion through many more undisturbed square meters of area...

This paper discusses laboratory measurements on a small test house. IRT measurements and (de)pressurization tests were performed on different types of junctions, e.g. at the window-wall interface. The results were analysed by calculating the temperature factor, to compare IRT images from different joints...

Proposals for solutions in accordance with German standard DIN 4108 Teil 7 What does real life look like? What can actually be solved? Challenges, interface issues between the different trades and crafts, and possible suggestions for solutions. The industry-wide educational and training center of the Baden-Württemberg...

Stricter requirements, e.g. for thermal insulation and moisture protection, as well as progression in energy-efficient building have led to the development of special building materials and metrological equipment. Over the last two decades, airtightness measurements, frequently also called “BlowerDoor tests”, have become increasingly...