Skip to main content

The 27th AIVC and 4th Epic Conference, Technologies & sustainable policies for a radical decrease of the energy consumption in buildings, was held in Lyon, France, 20-22 November 2006.

Contains 153 papers 

Volume content
Best Practice for Double Skin Facades The BESTFACADE Project

Double skin facades have become a major architectural element in office buildings over the last 15years. A double skin facade can provide a thermal buffer…

Waldner, R.
Validation Exercise Applied to Some TRNSYS Componentsin the Context of IEA34/43

An important part of IEA 34/43 is concerning validation of building simulation models. Analytical andcomparative validation of multizone building simulation…

Adam, Ch.; André, Ph.
Increased Energy Efficiency and Improved Comfort

This paper summarises the work of the LowEx co-operation /1/. The aim was to promote rational use ofenergy by encouraging the use of low temperature heating…

Virtanen, M.J.; Ala-Juusela, M.
State of the Art of Double Skin Facades in Europe The results of WP1 of the BESTFAÇADE Project

The project BESTFAÇADE accumulated the state of the art of double skin façades in seven European countries (Austria, Belgium, France, Germany, Greece,…

Streicher, W.; Heimrath, R.; Hengsberger, H.; Mach, T.; Waldner, R.; Flamant, G.; Loncour, X.; Guarracino, G.; Erhorn, H.; Erhorn-Kluttig, H.; Santamouris, M.; Farou, I.; Duarte, R.; Blomsterberg, A.; Sjöberg, L.; Blomquist, C.
Condenser Heat Recovery in Air Conditioning Systems

This paper is based on the first Belgian case study developed in the frame of theIEA-ECBCS annex 48 project. It concerns an industrial building in…

Hanus, V.; Lebrun, J.; Lemort, V.
Comfortable High-Performance and Low-Exergy Built Environment

This paper outlines the applicability of the “exergy” concept to describe the built environment for a better futuristic view of heating and cooling systems…

Shukuya, M.
Cut Back of Non-technological Barriers to Double Skin Facades

This paper is part of the “Best Practice for Double Skin Facades” – ‘BESTFACADE’ project (supported by the Intelligent Energy Europe Programme of the…

Santamouris, M.; Farrou, I.; Zerefos, S.
Regulation of Temperature by Phase Change Materials

Important properties of the indoor air quality are temperature and humidity. Very often in new and oldbuildings the temperature is too high or varies too…

Dreyer, J.
Exergy Use in the Built Environment Basics and Analyses

It is often claimed that energy is consumed; this is not only done in everyday conversation but also inscientific discussions associated with energy and…

Schmidt, D.
Roadmap for Future Actions Regarding the Energy Performance of Existing Buildings

The EIE 2003 SAVE ENPER EXIST project (www.enper-exist.com) aims to address the specificproblems of the existing…

Loncour, X.; Wouters, P.
Experimental Investigation of Thermal Behaviour of Phase Change Materials under Dynamical Thermal Effects

Because we spend most of our time in enclosed spaces, thermal comfort of buildings rose increasinglyand then energy consumption correspondingly is increased…

Kuznik, F.; Virgone, J.; Reisdorf, R.
Energy Saving Measures in Existing Buildings in Denmark

Denmark has long experience with mandatory labelling of existing buildings. In the implementation ofthe new labelling scheme in relation to the Energy in…

Aggerholm, S.
Building Blueprint: Endorsement Schemes for Building Energy Efficiency Improvements in the EU25

Although there is significant support among policy makers and politicians for energy efficiencyimprovements in buildings, there remains a lack of…

Klinckenberg, F.
CO2 Emission and Energy Saving Potential through Correct Pipe Insulation of Space Heating and Domestic Hot Water Distribution Systems in the New and Existing Buildings

In March 2003 a “CO2 - Saving Potential when using Pipe Insulation” study [1], sponsored by Armacell - worldwide producer of flexible pipe insulation…

Chmielarski, J.
Development of a Method for Building Energy Diagnosis ; Application to an Existing Light Weight Building

The goal of this study, carried out on a wooden building, is to apply the methodology of identification inorder to obtain the physical parameters which…

Mejri, O.; Palomo, E.; Ghrab-Morcos, N.
Fixed and Customised Benchmarks for Building Energy Performance Certificates based on Operational Ratings

The EPLabel project is developing a ‘graduated response’ to address the EPBD Article 7.3 requirement for ‘Public Buildings’ over 1,000 m² to display an…

Cohen, R.; Bordass, W.; Field, J.
Assessment of the Potential of Cool Materials to Contribute to the Mitigation of the Heat Island Effect in Athens

The mitigation of the heat island effect can be achieved by the use of cool materials that arecharacterized by high solar reflectance and infrared emittance…

Synnefa, A.; Dandou, A.; Santamouris, M.; Tombrou, M.; Soulakellis, N.
Evaluation of Indoor Climates Using the ‘Climate Evaluation Chart’

The indoor climate plays a key-role in relation to sustainable building. Often measured or simulatedtime series are used for the evaluation of indoor…

Martens, M.H.J.; van Schijndel, A.W.M.; Schellen, H.L.
Impact of BIPV Systems on Eco Systems Productivity

Building Integrated Photovoltaic (BiPV) systems is a “Zero Land and Zero Water” power systems as it neither consume any additional land nor consume any…

Ghosh, B.; Roy, M.
Direct Ground Cooling: Influence of Ground Properties on the Ground Heat Exchanger Size

In this paper the thermal behaviour of a direct ground cooling system located in Milano, Italy, isstudied by means of dynamic simulations performed in the…

Angelotti, A.; Solaini, G.
Showing 21 to 40 of 153. Page 2 of 8