Skip to main content

This page lists the Proceedings (titles and abstracts) of the online 13th International BUILDAIR Symposium, held on 2- 3 June 2023 in Hannover, Germany.

Contains 38 titles and abstracts. 

Volume content
Airtight Buildings, Thermography and Ventilation Systems in Practice

The book of proceedings of the 13th International BUILDAIR Symposium "Airtight Buildings, Thermography and Ventilation Systems in Practice",…

International BUILDAIR Symposium
Measuring airtightness of 100-meter high-rise buildings (lessons learned) – part 2

Worldwide, the demand for airtightness tests of tall buildings with a height of approximately 100 m is increasing. This report provides information on the…

Stefanie Rolfsmeier
Messung der Luftdichtheit von Hochhäusern über 100 Meter (Projekterfahrungen) – Teil 2

Weltweit steigt die Nachfrage nach Luftdichtheitsprüfungen von hohen Gebäuden mit einer Höhe ab ca. 100 m. Dieser Bericht informiert über…

Stefanie Rolfsmeier
Zone measurements and their analysis as carried out in apartments

Purpose of the work 
According to the two Swiss building standards Minergie-P and Minergie-A, individual dwelling units are…

Gregor Notter
Auswertung von Zonenmessungen am Beispiel von Wohnungen

Ziel der Arbeit/Fragestellung 
Für die beiden schweizerischen Energiestandards Minergie-P und Minergie-A werden…

Gregor Notter
Pressurization time for measuring very airtight buildings and buildings with flexible airtight layers

Purpose of the work 
When dealing with very airtight buildings and buildings with flexible airtight roofing felts it might take…

Joachim Zeller
Dauer des Druckaufbaus bei der Messung sehr dichter Gebäude und von Gebäuden mit flexiblen Luftdichtheitsschichten

Ziel der Arbeit/Fragestellung 
Bei sehr dichten Gebäuden und bei Gebäuden mit flexiblen Luftdichtheitsschichten…

Joachim Zeller
Air pressure measurements at a particularly airtight and unusual building: "Concrete shell for CO2 storage in recycled concrete aggregates"

I would like to report on lessons learned in the field regarding two measurements at a special, particularly airtight and unusual…

Michael Wehrli
Luftdichtheitsmessungen an einem besonders dichten und ungewöhnlichen Objekt "Betonhalle zur CO2-Speicherung in Recycling- Beton"

Aus praktischer Sicht möchte ich über Erfahrungen von zwei Messungen an einem speziellen, besonders dichten und ungewöhnlichen Objekt…

Michael Wehrli
Improvement of the ISO 9972: proposal for a more reliable standard to measure airleakage rate using fan pressurization method

Purpose of the work 
ISO 9972 describes the measurement procedure and calculation methods for determining the…

Benedikt Kölsch, Adeline Mélois, Valérie Leprince
Änderung der ISO 9972: Vorschlag für eine verlässlichere Norm zur Messung des Leckagestroms mit dem Differenzdruckverfahren

Ziel der Arbeit/Fragestellung 
ISO 9972 beschreibt das Messverfahren und die Berechnungsmethoden zur Bestimmung…

Benedikt Kölsch, Adeline Mélois, Valérie Leprince
Lock-In Thermography with Blower Excitation for Air Leakage Detection at Facades

Purpose of the work 
Knowledge of air leakages in building envelopes, in location and magnitude, is essential…

Johannes Pernpeintner, Benedikt Kölsch, Björn Schiricke
Lock-in-Thermografie mit Gebläse-Steuerung zur Ermittlung von Leckageströmen an Fassaden

Ziel der Arbeit / Fragestellung 
Für eine kosteneffiziente, energetische Sanierung im Bestand ist es enorm…

Johannes Pernpeintner, Benedikt Kölsch, Björn Schiricke
Building airtightness requirements in Spain

Nowadays, it is unquestionable the fact that building airtightness impacts the energy and ventilation performance of buildings. However,…

Irene Poza-Casado
Anforderungen an die Luftdichtheit von Gebäuden in Spanien

Heute steht außer Frage, dass die Gebäudeluftdichtheit die Energie- und Lüftungsleistung von Gebäuden beeinflusst. In Mittelmeerländern…

Irene Poza-Casado
Testing of large buildings by using fans in the ventilation system

When testing large buildings, it is possible to calibrate the flow of ventilation fans with the Minneapolis system. The test is run and…

Lars Due
Prüfung großer Gebäude durch den Einsatz von Ventilatoren im Lüftungssystem

Beim Testen großer Gebäude ist es mit dem Minneapolis-System möglich, den Durchfluss von Lüftungsventilatoren zu kalibrieren. Der Test…

Lars Due
Mold at the construction site

Purpose of the work

What to do with visible mold infestation at the construction site? How…

Theo Reuter, Andreas Fligg
Schimmel auf der Baustelle

Ziel der Arbeit/Fragestellung 
Was ist zu tun bei einem visuellen Schimmelbefall auf der Baustelle? Wie…

Theo Reuter, Andreas Fligg
Energy losses and defects in ventilation systems, especially in single and multi-family homes

Airtightness is mandatory, as are ventilation concepts. Today, the construction/renovation of a building without a ventilation system is…

Theo Reuter
Showing 1 to 20 of 39. Page 1 of 2