Skip to main content

International Building Simulation Conference 2003, Eindhoven, Netherlands.

Contains 190 papers.

Volume content
Simplified models to simulate part load perfomances of air conditioning equipments

The    performances  of  air  conditioning  equipments, like heat pumps, chillers or air conditioners, derive not only…

Ernesto Bettanini, Alessio Gastaldello, Luigi Schibuola
Numerical simulation of buildings thermal behavior and human thermal comfort multi-node models

In this work two numerical models are presented. The first one simulates the buildings thermal response and evaluates the internal air quality, …

Eusébio Z. E. Conceição
Simulation support for the formulation of domestic sector upgrading strategies

This paper describes the application of a building simulation program to construct a decision-support tool for use by policy makers addressing the…

Clarke J. A., Johnstone C. M., Lever M., McElroy L. B., McKenzie F., Peart G., Prazeres L. and Strachan P. A.
Prediction of the effect of breaking window in a double skin façade as a result of fire

It is necessary for fire safety that in case of a flash-over situation, the windows in the outer skin would break very fast and before the windows in the…

Erik den Tonkelaar
The practical application of CFD to wind engineering problems

Computational  Fluid  Dynamics  (CFD)  software  is increasingly being used to predict the effects of wind on buildings and on…

Garry Palmer, Bernardo Vazquez, Graham Knapp, Nigel Wright
Simspark: an object-oriented enviroment to predict cuoped heat and mass transfers in building

The  non-uniform  behavior  of  the  air  inside  a room, which is important in comfort analysis, can be evaluated…

L. Mora, K.C. Mendonça, E. Wurtz, and C. Inard
Numerical simulation on the prevention effect of the cold draft along the window in wintertime

This study is aimed to contribute to energy saving and to achieve the indoor thermal comfort by preventing the down draft along the window in building…

Yasuo Utsumi, Hiroshi Kobayashi and Ryushi Kimura
Sky view factors estimation using a 3D-GIS extension

The   sky   view   factor   indicates   the   relationship between the visible area of the sky and the area covered by…

Léa C.L.Souza, Daniel S. Rodrigues, José F.G. Mendes
Preliminary study on an estimation method for annual solar irradiance at varius geographial altutudes

A  preliminary  investigation  is  made  into  the  global variation in irradiance under the Clear, the Intermediate…

Masato Oki and Hiroyuki Shiina
Simulated as an enabling technology for cooperative working

The barriers to simulation deployment in design practice are well documented. They include: a steep learning curve, a lack of trained staff, hardware…

McElroy L. B., Elrick B. F., Grant R., Telfer S. D., Elliot G. A.
Occupant responsive optimal control of smart façade systems

Occupant responsive optimal control is developed for so called smart façade systems. The control optimizes the performance of the system by rotating a…

Cheol-Soo Park, Godfried Augenbroe, Nader Sadegh, Mate Thitisawat, Tahar Messadi
Skyvision: a software tool to calculate the optical characteristics and daylighting performance of skylights

Skylights   can   offer   useful   benefits  in  reducing building energy consumption and improving building occupants…

A. Laouadi, A. Galasiu, M. Atif, A. Haqqani
Presentation of the international building physics toolbox for Simulink

The international building physics toolbox (IBPT) is a software library specially constructed for HAM system analysis in building physics. The toolbox…

Peter Weitzmann, Angela Sasic Kalagasidis, Toke Rammer Nielsen, Ruut Peuhkuri and Carl-Eric Hagentoft
Simulating building evacuations with a model

A computer-model is used to simulate the evacuation of the occupants in a building. The aim of the simulations is to establish an equal level of…

Ronald Oldengarm
On the influence of the inlet temperature in multiple-skin facade modelling

This paper draws the attention to the importance of a correct modelling of the inlet temperature of naturally and mechanically ventilated multiple-skin…

Saelens D., Roels S. and Hens H.
Spray vaporization for evaporative cooling of buildings

This  article  presents  a  one-dimensional  model  of spray vaporization that can be easily used in thermal performance…

Antonio César S. Baptista da Silva, José A. Bellini da Cunha Neto, Roberto Lamberts
Procedures for calculation of NOx emissions reduction from implementation of the 2000 IECC/IRC conservation code in Texas

Four areas in Texas have been designated by the United States Environmental Protection Agency (EPA) as non-attainment areas because ozone levels exceed…

Jeff S. Haberl, Piljae Im, Charles Culp, Bahman Yazdani, Tom Fitzpatrick, Dan Turner, Malcolm Verdict
Simulating fuel-fired combination space and domestic water heating systems

HVAC systems that supply both space heating and domestic hot water are becoming more popular in residential buildings In North America. With these…

Ian Beausoleil-Morrison, Kamel Haddad
Optimization of airflow regimes, energy efficiency and air quality in surgical operation theatres

The present paper addresses and fosters the factors that  affect airflow movement and energy efficiencies in the surgical operating theatres. The…

Ramiz Kameel, Essam E. Khalil
Technical and economical interest of sustainable refurbishment technologies in France, Italy and Filand

The aim of the European SSHORT (Sustainable Social Housing Refurbishment Technologies) project is to increase and promote rational and efficient use…

N.Chatagnon, C. Dalibart, S. Karjalainen, K. Klobut, I. Koronaki, P. Puccetti
Showing 41 to 60 of 190. Page 3 of 10