Skip to main content

International Building Simulation Conference 2005, Montreal, Canada.

Contains 180 papers.

Volume content
Contrasting the capabilities of building energy performance simulation programs

For the past 50 years, a wide variety of building energy simulation programs have been developed, enhanced and are in use throughout the building…

Drury B. Crawley, Jon W. Hand , Michaël Kummert and Brent T. Griffith
Weather data analysis based on typical weather sequences. Application: energy building simulation

In building studies dealing about energy efficiency and comfort, simulation software need relevant weather files with optimal time steps. Few tools…

Mathieu David, Laetitia Adelard, Franvois Garde, Harry Boyer
Winter thermal improvement of a traditional house in Nepal

An indoor thermal  simulation  was conducted  in a traditional house in a mountain area of Nepal for the purpose of thermal improvement…

Hom Bahadur Rijal, Harunori Yoshida
Validity of quasi-steady convection for simulation of VOC source and sink behavior of porous building materials

Volatile organic compounds (VOC) are major indoor air pollutants. Physical models that have been developed to predict VOC source (emission) and sink…

Chang-Seo Lee, Fariborz Haghighat, Wahid Ghaly
Variation of energy consumption and demand due to different heating timing

When designing district heating serving different buildings, an architectural engineer should suggest optimal operation policy of heating, based…

Milorad Bojić, Milan Despotivić
Verification of energy efficiency of district heating and cooling system using realistic parameters

This study aims to verify the advantages of district heating and cooling (DHC) systems in terms of energy efficiency. From the measurement data,…

Yoshiyuki Shimoda, Tomoji Nagota, Naoaki Isayama, Minoru Mizuno
The architects approach to the project of energy efficientoffice buildings in warm climate and the importance of designmethods

This article aims at a better understanding of how decisions are taken to improve energy performance of office buildings in warm climates and why…

Aldomar Pedrini, Steven Szokolay
Simplified model-based optimal control of VAV air conditioningsystem

A simplified optimization process (SOP) for determining set points is proposed and evaluated using the monitoring data and model of an existing…

Nabil Nassif, Stanislaw Kajl, and Robert Sabourin
Toward a unified information space for the specification of building performance simulation results

We present a framework for the specification of building performance simulation output results. Toward this end, we describe a simulation output…

Ardeshir Mahdavi, Julia Bachinger, Georg Suter
Simulation-based design by hierarchical optimization

This paper critically examines the use of Analytic Target Cascading as a multi-level, hierarchical design optimization model for formulating …

Ruchi Choudhary, P.Y. Papalambros, Ali M. Malkawi
The development of a test protocol for anon-line whole-building energy analysis tool for homeowners

This paper presents the testing of a dynamic on-line whole-building energy calculator. The Home Energy Analyser is intended for use by the…

Julia Purdy, Phylroy Lopez, Kamel Haddad, Alex Ferguson, Stephanie Mombourquette, Paul Wyndham-Wheeler, Shawn Henry
Simtest-elec: a virtual laboratory for the test of terminal controllers for electric heating systems following a draft European standard

CEN TC247 has prepared draft standards for main types of room controllers. These standards include a performance testing procedure that was…

P. Riederer, F. Bruyat, B. Clémençon, S. Bernasconi, G. Desjardins
Transferring simulation from specialists into design practice

Building simulation tools (energy, lighting, plant simulation, CFD, etc) have long been the preserve of a few specialist consultancies rather than being…

Iain A Macdonald, Lori B McElroy, Jon W Hand, Joe A Clarke
Simulation-based design procedure to evaluate hybrid renewableenergy systems for residential buildings in Korea

Energy and environment issues such as the reduction of greenhouse gas emissions and ecological-friendly buildings are increasingly of interest in the…

J. Clarke, J. Hong, J. Kim, P. Strachan, I. Hwang, H. Lee
The numerical modelling of the diffusive-convective watervapour transport through the building constructions

The following paper is focused on the effects of the combined water vapour transport caused by diffusion and convection. The governing equation of…

Zbynek Svoboda
Simulating tall buildings using energyplus

Tall buildings pose unique challenges for simulation software and modelers. Environmental factors such as air temperature and wind speed …

Peter G. Ellis and Paul A. Torcellini
Two DOE-2 functions

This paper presents two DOE-2 functions to expand the modeling capability of DOE-2.1E, a popular calculation engine for building energy…

Tianzhen Hong, Charles Eley, and Erik Kolderup
Sky luminance mapping for computational daylight modeling

Building design and control applications can benefit from daylight simulation. Currently, most daylight simulation applications work with simplified…

Bojana Spasojević and Ardeshir Mahdavi
Performance comparison of heating control strategiescombining simulation and experimental results

Different heating system controllers for passive solar buildings are compared on two different buildings. The performance criterion combines…

Michaël Kummert, Philippe André, Athanassios A. Argiriou
The potential of comfort daylighting design on improving the energy efficiency of commercial buildings

This paper explores means for more effectively exploiting daylight in buildings through extending periods of illumination free of glare problems.…

Mohamed Kassab, James A. Love
Showing 1 to 20 of 180. Page 1 of 9