Skip to main content

International Building Simulation Conference 2009, Glasgow, Scotland. 

Contains 307 papers.

Volume content
A Modelica-based model library for building energy and control systems

This paper describes an open-source library with component models for building energy and control systems that is based onModelica, an equation-…

Michael Wetter
Computational fluid dynamics in an equation-based modeling environment

The simulation of the energy performance of buildings has historically been compartmentalized along the lines separating different disciplines or…

Jason Brown, Godfried Augenbroe, Ruchi Choudhary, Christiaan Paredis
Building energy simulation and object-oriented modelling: review and reflections upon achieved results and further developments

Over the past 30 years numerous Building Simulation Codes (BSC) have been developed. Nevertheless, none of them has yet become a “standard”.…

Livio Mazzarella, Martina Pasini
Methodology for developing reusable scheduler classes applicable for long term building energy simulation

The aim of this study is to accelerate developments of building simulation programs by using Object- Oriented programming. A reusable generalised…

Eisuke Togashi and Shin-ichi Tanabe
Influence of ground heat exchanger modelling on the predicted efficiency of the heat pump system

This paper presents simulations of the integral coefficients of performance of a heat pump system coupled with a vertical ground heat exchanger…

Wojciech Kozak, Joachim Seifert and Wolfgang Richter
Use of response factor method to model earth-to-air heat exchanger behaviour. Integration in a whole building simulation into SIMSPARK plat form

This paper shows the numerical model of an earth-toair heat exchanger. The system is discretized into “n” sections perpendicular to the exchanger…

Pierre Tittelein, Etienne Wurtz, Gilbert Achard
Simulation of a domestic ground source heat pump system using a transient numerical borehole heat exchanger model

Common approaches to the simulation of Borehole Heat Exchangers (BHEs) assume heat transfer in circulating fluid and grout to be in a quasi-steady…

Miaomiao He, Simon Rees, Li Shao
Seasonal storage of solar energy in borehole heat exchangers

Seasonal storage of solar energy in geothermal boreholes has resurfaced as a means of heating housing communities. Typically, these systems …

Simon Chapuis and Michel Bernier
Comparison of a ground-coupling reference standard model to simplified approaches

The transfer of energy from the ground to buildings through slabs and basements has long been a point of large errors in simulations. Work to…

Timothy P. McDowell, Jeff W. Thornton, Matthew J. Duffy
Comparison of standard and case-based user profiles in building’s energy performance simulation

The user’s action is a decisive factor in the energy performance of a building. In this paper is demonstrated the necessity of using more specific…

Sergio Cantos Gaceo, Félix Iglesias Vázquez, Jordina Vidal Moreno
Methodology to enhance the Portuguese thermal regulation accuracy for existing buildings

The goal of this study is to evaluate the accuracy of the Portuguese thermal regulation simplified methodology for existing buildings and to…

Pedro Silva, Manuela Almeida, Luís Bragança and Vasco Mesquita
Asset rating: disagreement between the results obtained from software for energy certification

The general practice for establishing the consumption in asset ratings of a building consists of entrusting the energy analysis of the shell of a…

Angelo Milone, Daniele Milone, Salvatore Pitruzzella
An analysis of results variability in energy performance compliance verification tools

To address the functional complexities and volumetric variability found in the UK non-domestic building stock (Pérez-Lombard et al, 2008, Bruhns,…

Rokia Raslan, Michael Davies, Nick Doylend
UK building energy calculation software approval scheme

As part of the UK government Energy Performance of Buildings Directive (EPBD) initiative, the requirement of Asset and Operational Ratings for buildings…

Michael Chin Nam LIM
A comprehensive stochastic model of window usage: theory and validation

Based on almost seven years of continuous measurements we have analysed in detail the influence of occupancy patterns, indoor temperature and…

Frédéric Haldi and Darren Robinson
Toward empirically-based models of people's presence and actions in buildings

This paper presents the results of a recent study of people's presence and their interactions with the buildings' environmental systems in a…

Ardeshir Mahdavi, Claus Pröglhöf
A comprehensive stochastic model of blind usage: theory and validation

Based on six years of continuous measurements, we have analysed in detail the occupancy, thermal and visual parameters influencing blind usage behaviour.…

Frédéric Haldi and Darren Robinson
Total utility demand prediction based on probabilistically generated behavioral schedules of actural inhabitants

This paper describes a new methodology in calculating accurately the time series utility loads (energy, power, city water, hot water, etc.) in a…

Jun Tanimoto and Aya Hagishima
On selecting weather data sets to estimate a building design’s robustness to climate variations

The integration of techniques for uncertainty and sensitivity analysis in building performance simulation (BPS) has a number of potential benefits…

Christian Struck, Pieter de Wilde, Janneke Evers, Jan Hensen and Wim Plokker
Multiscale modelling of urban climate

Climate Modelling is a complex task. One of the most important reasons is the presence of a large variety of spatio-temporal scales. There are…

Adil Rasheed and Darren Robinson
Showing 221 to 240 of 307. Page 12 of 16