Skip to main content

International Building Simulation Conference 2013, Chambéry, France. 

Contains 470 papers.

Volume content
Design optimization of square skylights in office buildings

This research focuses on design optimization of horizontal roof apertures known as skylights in office buildings. It is one of the steps towards design,…

Ladan Ghobad, Wayne Place, Soolyeon Cho
Design optimization of daylight roofing systems: roof monitors with glazing facing in two opposite directions

This research focuses on design optimization of roof daylighting systems in office buildings.  The optimization is based on computer simulation of…

Ladan Ghobad, Wayne Place, Soolyeon Cho
Analytical optimization of simple roof shading devices

Parametric and algorithmic design tools have developed significantly in the last few years with the advent of several commercial and open-source…

Khaled Nassar, Mohamed Aly
Heat losses in collective heat distribution systems: comparing simplified calculation methods with dynamic simulations

Heat losses in collective heat distribution systems can be reduced significantly in well-insulated and well-controlled low-temperature networks. However,…

Eline Himpe, Julio Efrain Vaillant Rebollar, Arnold Janssens
Development and validation of the California simulation engine

This paper describes the California Simulation Engine (CSE), a public domain, multi-zone, short-time step, detailed annual building simulation application…

Charles S. Barnaby, Bruce A. Wilcox, Philip Niles
Energy performance of earth-air heat exchanger: impact of various input parameters on simulation results

Earth-air heat exchangers can be considered as one of the current responses to the problem of rational use of energy and comfort in buildings. The aim of…

Stephane Ginestet, Jerome Lopez, Stephanie Decker
LADYBUG: A parametric environmental plugin for grasshopper to help designers create an environmentally-conscious design

As high performance design is becoming more desirable in the field of architecture, the need for supporting architects with environmental analysis tools is…

Mostapha Sadeghipour Roudsari, Michelle Pak
Creating simulation and analyzing systems of the amount of solar energy that received at residential buildings (case study: residential complex of Karaj Mehrshahr)

The quality of a residential complex is based on numerous factors such as their access, privacy, legibility, appearance. Arrangement of the building blocks…

Ali Andaji Garmaroodi, Nilufar Mohammadzadeh, Salimeh Rasouli
Global model based anticipative energy management of a complex railway station

This paper deals with the energy man-agement problem of a railway station. This problem comes out from the VEGEP project whose goal is to prove the benefit…

Yanis Hadj-said, Stephane Ploix, Yann Rifonneau, Julien Pouget, Xavier Brunotte, Frdric Wurtz, Benjamin Lhenoret
Design of nearly zero energy buildings coupled with an earth to air heat exchanger in Mediterranean climate: Development of an analytic model and validation against a monitored case study

At the Passivhaus of Cherasco, located in Pianura Padana (Italy), an earth to air heat exchanger (EAHE) and natural night ventilation (in summer) are used…

Lorenzo Pagliano, Paolo Zangheri
Hassan Bouhess, Hassan Hamdi, Brahim Benhamou, Amin Bennouna, Pierre Hollmuller, Karim Limam
Usage patterns of scripting interfaces for building performance assessment at early design stage

The paper documents an ongoing study in the use of Building Performance Simulation (BPS) as a source of feedback in the early stages of architectural design…

Nembrini Julien, Meagher Mark, Park Adam
Building classification based on simulated annual results: towards realistic building performance expectations

This study reviews typical assumptions for days of operation, sub-space type receptacle and other unregulated process loads, and occupancy rates to propose…

Mohammad Heidarinejad, Matthew Dahlhausen, Sean McMahon, Chris Pyke, Jelena Srebric
Thermal comfort and IEQ assessment of an under-floor air distribution system

In this article, an under-floor air distribution system is analyzed.  The inlet device is placed near a thermal manikin and several turbulence…

Bode Florin Ioan, Croitoru Cristiana Verona, Dogeanu Angel Madalin, Nastase Ilinca
Integrating performance and parametric design tools for urban daylight enhancement

The majority of the natural lighting, in urban slums and rural areas arround the world, is blocked off and virtually no light reaches the building spaces in…

Mohamed Aly, Khaled Nassar
Simulation to support ISO 50001 energy management systems and fault detection and diagnosis: case study of Malpensa airport

This paper describes the use of building performance simulation into a wider implementation of an energy management system (EnMS) based on ISO 50001…

Luis M. Blanes, Andrea Costa, Marcus M. Keane
Showing 261 to 280 of 470. Page 14 of 24