Skip to main content

The 21st AIVC Conference, Innovations in Ventilation Technology, was held in the Hague, Netherlands, 26-29 September 2000.

Contains 60 papers

Volume content
Validation of a computational fluid dynamics simulation of a supply air 'ventilated' window.

A currently unresolved problem in building design is the paradox between increasing demandfor good thermal insulation, and the requirement for ample levels…

McEvoy M, Southall R G
Air flow and thermal analysis of a forced air heating and ventilation system.

The prediction of energy use, air flows and temperatures in different rooms of a building andat different climatic conditions is very important, especially…

Levin P
Natural ventilation activated by induction.

This article describes a ventilation system, developed within the framework of aEuropean project supported by the JOULE III programme (NAVAIR project).…

Noel O, Le D‚an P, Krikorian O, Haller R
The development of low-pressure mechanical ventilation systems Le Vent.

The target in this study was to decrease the energy use for transportation of air (fanenergy) with a factor of three. Two real systems composed of existing…

de Gids W, Phaff H, Knoll B
Derivation of simple ventilation and thermal models for a naturally ventilated auditorium with high internal heat gains.

Measurements of ventilation rates and internal temperatures have been recorded in a naturallyventilated auditorium with high intermittent heat gains for a…

Clancy E M
"Humid Air" and cooled walls.

The humidity of room air is a necessary influence of design under the aspects of thermalbehavior, technology and conservation.The moisture absorption in the…

Trogisch A, Franzke U
A mathematical model for infiltration heat recovery.

Infiltration has traditionally been assumed to affect the energy load of a building byan amount equal to the product of the infiltration flow rate and the…

Buchanan C R, Sherman M H
The role of simplified ventilation modeling for the application of low energy design: a library case study.

This paper discusses how simplified thermal and ventilation tools could be used during thefeasibility study of buildings to demonstrate the advantages of…

Rufus S C, Kolokotroni M
A new facade unit integrating ventilation, daylighting, solar protection, intelligent local control and photovoltaic power.

Within the EC-JOULE project "AIRLIT-PV", a new facade unit, integrating ventilation, daylighting, solar protection, intelligent local control and…

Kronvall J, et al
The influence of variations in base temperature over the calculated ventilation energy demand.

The heating degree-days method is widely used for calculation of the air change heating energydemand. However, different countries perceive different values…

Binamu A, Linberg R
Integration of indoor and outdoor airflow study for natural ventilation design using CFD.

Natural ventilation is one of the most fundamental techniques to reduce energy usage inbuildings. However, due to complicated site plans and building…

Zhai Z, Hamilton S D, Huang J, Allocca C, Kobayashi N, Chen Q
Quantifying ventilation needs in Local Authority housing - a case study.

A Tool Kit was developed to assess indoor air quality. The Tool Kit was designed to be robust, reliable, universal and to provide data that could be linked…

Richardson G, Eick S A, Harwood D J
Natural ventilation air change rates considering atmospheric turbulence.

The estimate of actual air change rates considering atmospheric turbulence isintroduced. The starting point is the spectral description of turbulence -…

Marques da Silva F, Saraiva J G
Typology of hybrid ventilation systems and practical examples.

This paper aims to identify major characteristics of hybrid ventilation systems, whereby a clear distinction is made between ventilation for Indoor Air…

Wouters P, Heijmans N, Delmotte C, Vandaele L
Impact of ventilator parameters on system energy consumption.

The operation and performance of forced-air ventilation systems with the aid of a dynamic modeling and simulation computer program are presented. The…

Shah D J
Design of ventilation systems in industrial buildings. A computational approach of displacement ventilation in paper industry.

In this paper, the ventilation of a “crêpe” paper-processing workshop containing dryers, which generate a high thermal load, is considered. Displacement…

Papakonstantinou K A, Kiranoudis C T, Markatos N C
Airflow rate performance of various ventilation systems. Results of measurement in a typical Belgian dwelling.

This paper presents the results of ventilation measurements taken in a non-occupied one-storey dwelling situated in the countryside. The measurements of the…

Loncour X, Wouters P
The discharge coefficient - experimental measurement of a dependence on density contrast.

At sufficiently high Reynolds numbers, the discharge coefficient Cd associated with a sharplycontracting flow through a square-edged opening is, in general…

Hunt G R, Holford J M
Performance evaluation of hybrid ventilation system in a full-scale test house.

A hybrid ventilation system is a two-mode system that can automatically switch between passive and mechanical mode at different times of the day or seasons…

Liu J, Yoshino H
Evaporative cooling and sorption assisted dehumidification with liquid salt solutions.

The traditional way to dehumidify the outdoor air in an A/C-system is by cooling the air downbelow the dew point temperature. For this process a…

Biel S, Steimle F
Showing 21 to 40 of 60. Page 2 of 3